Log in

Log in

Metal Coil Processing Impingement Dryer

Dryer for Metal Coil Processing

Cire Technologies is proud to announce it has completed the design and fabrication of a metal coil dryer to be utilized by a metal finishing company in Mississippi.

The dryer utilizes hot air, direct impingement, both above and below the metal coil to remove the water retained from previous processing.

All interior surfaces of the dryer are fabricated out of stainless steel.  The housing includes four inches of insulation and an aluminized steel exterior skin.

The dryer was completely assembled, wired and piped before shipping.  A Maxon Corporation, Ovenpak, natural gas burner provides the heat for the dryer and the gas train components and flame safeguard are manufactured by Honeywell.

Both the supply/recirculating air and exhaust air fans include Allen Bradley variable speed drives, which are connected to the main control system utilizing Ethernet protocol.  An Allen Bradley I/O module is included to connect the dryer control system to the production line control system.

The project was completed on time and on budget.

Cire Latest Blogs

Eric Becht
02 May 2014
Projects
At Cire Technologies we are very cognizant of our customers’ cost of operating our equipment. One area we excel at is reusing waste heat from our equipment back into the process. A current project ill...
3
Eric Becht
14 April 2014
Dryer Design
A Sample Dryer ProjectIn this our last post on impingement dryer design we illustrate a simple set of dryer design calculations.Given:Tweb entry=60°FTweb exit=135°FTAir=220°F, TWeb=120°F or the wet we...
2
Eric Becht
31 March 2014
Dryer Design
The Primary Components of an Impingement Dryer – Part 2In this post we continue and finish the discussion of the primary components of an impingement dryer.Impingement Nozzles and Supply PlenumsThe de...
2
Contact Us

logo-contactPlease complete the form below to contact us. 
We will respond within 24 hours to all requests.

251 Boulevard • Mountain Lakes, NJ 07046-1209
800-388-8301 • 973-402-8301 • Fax: 973-402-8302
1000 characters left