Log in

Log in

New Heating Systems for Repurposed Flotation Dryers

Cire Technologies, Inc. has extensive experience modifying and repurposing existing equipment.  We recently designed, fabricated and installed new heating systems for four repurposed Worldwide flotation dryer zones for a Connecticut film converting company.  The four zones were used to create two lines of forty-foot drying for aqueous coatings.

The system included four burner boxes with Maxon Ovenpak, natural gas burners.  Temperature control for each zone is independent.

Because of limited space, eight airfoil supply air fans were used: one feeding the top nozzles and one feeding the bottom nozzles of each zone.  The fans for each zone are controlled by variable speed drives to provide flexibility to the dryers’ operation.

Since the dryer boxes’ upper halves retract up to eighteen inches, the design enables the top supply fan and recirculating ductwork to retract with the upper half of the existing dryer zones. 

Ductwork and the burner box were fabricated with stainless steel interior skins, protected by up to four inches of insulation and a 20-gage aluminized exterior skin.

The project also included two exhaust fans and the associated ductwork to deliver the exhaust from each line to atmosphere.

Complete gas trains and controls, utilizing Honeywell flame safeguard and gas train components, were incorporated with the burner box skids to simplify the installation.  Cire Technologies, Inc. also included Allen Bradley I/O modules for each zone to communicate with the line web coating and handling equipment, provided by others.  This enabled the dryers to be integrated with the line control system and HMI.

The entire project from design to completed installation and commissioning was completed on time and on budget.

For more information on how Cire Technologies, Inc. can work with you to update or repurpose existing equipment, please click the Quick Connect or Request Info buttons found on this page.

Cire Latest Blogs

Eric Becht
02 May 2014
Projects
At Cire Technologies we are very cognizant of our customers’ cost of operating our equipment. One area we excel at is reusing waste heat from our equipment back into the process. A current project ill...
3
Eric Becht
14 April 2014
Dryer Design
A Sample Dryer ProjectIn this our last post on impingement dryer design we illustrate a simple set of dryer design calculations.Given:Tweb entry=60°FTweb exit=135°FTAir=220°F, TWeb=120°F or the wet we...
2
Eric Becht
31 March 2014
Dryer Design
The Primary Components of an Impingement Dryer – Part 2In this post we continue and finish the discussion of the primary components of an impingement dryer.Impingement Nozzles and Supply PlenumsThe de...
2
Contact Us

logo-contactPlease complete the form below to contact us. 
We will respond within 24 hours to all requests.

251 Boulevard • Mountain Lakes, NJ 07046-1209
800-388-8301 • 973-402-8301 • Fax: 973-402-8302
1000 characters left