Coating Head Enclosure Humidification System

Cire Technologies, Inc. recently completed a humidification system in Michigan to humidify a large coating head enclosure.  The humidification system was designed to provide a constant level of humidification to the enclosure to improve the coating environment and help minimize the posibility of fires in the enclosure, due to static charges.

The customer had experienced an enclosure fire and subsequent substantial financial loss from the fire.  Our system, along with other enclosure improvements recommended by Cire Technologies, Inc., was designed to help eliminated the potential for future fires.

Our humidification system included improvements to the enclosure exhaust system, electric humidifier, a supply air system to control the rate of make-up air supplied to the enclosure to replace the existing vents in the wall of the enclosure, and a fully automated system to control the level of humidification in the enclosure.

The successful system was supplied on time and on budget.


Cire Latest Blogs

Eric Becht
02 May 2014
At Cire Technologies we are very cognizant of our customers’ cost of operating our equipment. One area we excel at is reusing waste heat from our equipment back into the process. A current project ill...
Eric Becht
14 April 2014
Dryer Design
A Sample Dryer Project In this our last post on impingement dryer design we illustrate a simple set of dryer design calculations. Given: Tweb entry=60°FTweb exit=135°FTAir=220°F, TWeb=120°F or the wet...
Eric Becht
31 March 2014
Dryer Design
The Primary Components of an Impingement Dryer – Part 2 In this post we continue and finish the discussion of the primary components of an impingement dryer. Impingement Nozzles and Supply Plenums The...
Contact Us

logo-contactPlease complete the form below to contact us. 
We will respond within 24 hours to all requests.

251 Boulevard • Mountain Lakes, NJ 07046-1209
800-388-8301 • 973-402-8301 • Fax: 973-402-8302
1000 characters left